Features

Control Surface

• 9 x 60mm touch-sensitive motorized faders (8 for channel and 1 for master)
• REC, SEL, SOLO, and MUTE control on each channel
• 4 encoders for EQ, PAN, SEND level control
• 3 control surface modes
  • COMPUTER: DAW control mode
  • MIDI CTRL: MIDI controller mode (with 4 BANKs)
  • MONI MIX: Input monitor or stand-alone mixer mode
• Selectable monitoring source
  • COMPUTER: DAW output
  • INPUTS: FW-1082’s analogue and S/PDIF inputs
  • BOTH: Both DAW and FW-1082’s Inputs
• 4 function keys (8 functions in total can be controlled with SHIFT key)
• Transport control with Jog/Shuttle dial, locate keys, and IN & OUT keys
• Cursor keys (up, down, left, and right)
• Compatible with a wide variety of popular DAW applications
• Mackie Control Emulation
• HUI Emulation

Audio Interface

• Audio I/O: 10 inputs and 2 outputs
• 24 bit resolution
• 44.1 / 48 / 88.2 / 96kHsampling frequency
• 4 XLR Mic inputs with 48V Phantom power
• 8 TRS Line inputs (Guitar input is available on channel 8)
• 2 TRS Inserts for channel 1 & 2
• Trim control with OL & SIGNAL indicators on each analogue input
• 2 analogue TRS balanced line outputs
• 1 coaxial S/PDIF digital Input
• 1 coaxial S/PDIF digital output
• Headphone output (1/4 stereo connector)

MIDI Interface

• 2 MIDI inputs
• 2 MIDI outputs
• 2 virtual MIDI outputs transmitted through the FireWire cable to the computer

Software Included

• Steinberg Cubase LE
• GigaStudio light version (Works on PC only)

General

• 2 x IEEE1394 6pin connectors
• ASIO 2.0, WDM, GSIF2 (audio) and MME (MIDI)
  compatibility for Windows 2000/XP
• Core Audio and Core MIDI compatibility for Mac OS X
• Foot SW Input (1/4 TRS connector)

Analogue I/O

MIC input 1-4 (Balanced)

Connector

XLR x 4 (1: GND, 2: Hot, 3: Cold)

Input impedance

2.2kohm

Adjustable Input range

-56dBu (TRIM max) to -2dBu (TRIM min)

Maximum gain

+54dB

Phantom power

Switchable +48V

LINE input 1-8 (Balanced)

Connector

1/4 inch TRS jack x 8

Input impedance

10kohm at LINE/MIC
1Mohm at GUITAR (LINE Input: 8 Switchable)

Adjustable input range

(channels 1-4) -42dBu (TRIM max) to +12dBu (TRIM min.)

Adjustable input range

(channels 5-8) -43dBu (TRIM max) to +4dBu (TRIM min.)

Maximum gain

+54dB (channels 1-4), +47dB (channels 5-8)

INSERT 1-2 (Unbalanced)

Connector

1/4” TRS x 2(Tip: SEND, Ring: RETURN, Sleeve: GND)

Send

Impedance

100ohm

Normal level

-2dBu

Maximum level

+14dBu

Return

Impedance

10kohm

Normal level

-2dBu

Maximum level

+14dBu

Analogue MONITOR (BAL) output

Connector: 1/4” TRS balanced jack x 2

Output impedance:

100ohm

Nominal output level:

+4dBu

Maximum output level:

+20dBu

Phones output (Stereo)

Max output power:

52mW + 52mW (32ohm)

Digital I/O

Digital input (COAXIAL)
* 2-channel serial digital audio signal input terminal. In the case of Hi sampling, Hi-speed mode is supported.

Connector

RCA jack x 1

Input impedance

75ohm

Format

IEC60958

Audio bit length

24-bit

Connector:

RCA jack x 1

Output impedance:

75ohm

Format:

IEC60958

Audio bit length:

24-bit

Misc. I/O

MIDI input 1-2

MIDI input terminal Connector:

5-pin DIN connector - conforms to MIDI specifications x 2

FireWire (IEEE.1394 digital interface)

Connector

IEEE.1394 connector x 2

Format

IEEE.1394

Transmit rate

400Mbps

FOOT SW (foot switch)

Punch In/Out of DAW application

Connector:

Normally-open 1/4” TRS jack

Overall System Specifications

Sampling frequency

Internal clock

44.1kH/ 48.0kH/ 88.2kH/ 96.0kH

External clock

Digital input

Analogue performance

THD (Level+4dBu):

< 0.005 %, 20 H- 20 kHz, LINE IN to INSERT SEND
<0.01%, 1 kHz, LINE IN to MONITOR OUTPUT

Frequency response (@ nominal level)

20H- 20kH(normal FS), +/-0.5dB, MIC/LINE IN to INSERT SEND
20H- 40kH(Hi FS), +0.5dB / -1.0dB, MIC/LINE IN to INSERT SEND
20H- 20kH(normal FS), +/-0.5dB LINE IN to MONITOR OUTPUT
20H- 40kH(Hi FS), +0.5dB / -2.0dB, LINE IN to MONITOR OUTPUT

Noise level (20H- 20kHz, TRIM max, 150ohm)

< -128dBu (EIN), MIC IN to INSERT SEND
< -64dBu, LINE IN to MONITOR OUTPUT

Crosstalk (@ 1kHz):

> 80dB MONITOR OUTPUT

Physical, etc. specifications

Power requirements (External power adapter AC input:)
 

100V AC, 50/60Hz
120V AC, 60H
230V AC, 50H
240V AC, 50H

Adapter output voltage

12V, 2.5A

Power consumption

22W

Dimensions (w x h x d)

486 x 83 x 386 (mm) (19.1" x 3.25" x 15.2")

Weight

6.5kg (14.3lb) (excluding adapter)

System Requirements

• IEEE1394 (i.Link) or FireWire port supporting S400 (400Mbps) speed on your Computer is needed. If no interface is present, a suitable PCI / PCMCIA FireWire interface may be used.

Windows XP Pro or Home Editions
TBC