 |
 |
 |
 |
Features
|
 |
 |
|
2 x E-MU XTC™ Ultra-low Noise Mic/Line/Hi-Z Preamps
with Soft Limiter and 48V Phantom Power (-129dBu EIN) |
|
|
|
4 x 1/4" Balanced Inputs |
|
|
|
6 x 1/4" Balanced Outputs |
|
|
|
Turntable Input (w/ground lug and hardware RIAA preamp) |
|
|
|
24-bit/192kHz ADAT In/Out (switchable to S/PDIF) |
|
|
|
24-bit/192kHz coaxial S/PDIF Out (switchable to AES/EBU) |
|
|
|
2 sets of MIDI In/Out |
|
|
|
stereo 1/8" Speaker Outputs (configurable from stereo to 5.1) |
|
|
|
2 x Stereo Headphone/Line Outputs (one on card, one on MicroDock M) |
|
| |
- E-DSP Hardware-accelerated Effects, Mixing and Monitoring:
E-MU's Digital Audio Systems feature the powerful E-DSP chipset, which features a hardware-accelerated effects processor with over 20 effects plug-ins (over 500 presets). This effects architecture is fully expandable, allowing you to add more effect plug-ins to your system as needed. E-DSP also provides zero-latency, hardware-based mixing and monitoring via the included PatchMix DSP mixer, delivering unmatched flexibility in routing audio between all of your physical and virtual (ASIO/WDM) inputs and outputs- no external mixer needed.
- All Digital Audio Systems ship with the following Effects Plug-ins:
| 1-Band Para EQ |
 |
1-Band Shelf EQ |
|
3-Band EQ |
| 4-Band EQ |
|
Auto-Wah |
|
Chorus |
| Compressor |
|
Distortion |
|
Distortion |
| Freq Shifter |
|
Leveling Amp |
|
Mono Delay 100 |
| Mono Delay 3000 |
|
Stereo Delay 100 |
|
Stereo Delay 1500 |
| Phase Shifter |
|
Rotary |
|
Speaker Simulator |
| Stereo Reverb |
|
Vocal Morpher |
|
|
Click on the MP3 samples below to hear some of these Plug-ins in action. Each MP3 sample starts with an uneffected instrument/vocal recorded clean using the Digital Audio System, followed by the same instrument/vocal with effects. (these MP3's are between 300K and 900K each).
Specifications
General Specifications
|
|
|
Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192kHz from internal crystal or externally supplied clock (no sample rate conversion) |
|
|
|
Bit Depths: 24 bit I/O, 32 bit processing |
|
|
|
CardBus Card Specification: |
|
|
|
|
- Form factor: PCMCIA Type II |
|
- Bus-Mastering DMA subsystem reduces CPU usage |
|
|
|
|
E-MU® E-DSP™ 32-bit DSP with 67-bit accumulator (double precision w/ 3 headroom bits) |
|
|
|
Hardware-accelerated, 32 channel mixing, and multi-effects processing |
|
|
|
Zero-latency direct hardware monitoring w/effects |
|
|
|
ASIO 2.0, Stereo WDM/MME/DirectSound Drivers |
|
|
|
EDI (E-MU Digital Interface) proprietary 64 channel audio link over CAT-5 cable |
|
|
|
Anti-Pop speaker protection minimizes noise during power on/off |
|
|
|
-low jitter clock subsystem: < 1ns in PLL mode (44.1kHz, Opt. S/PDIF Sync) |
|
Analogue Line Inputs (4)
|
|
|
Type: servo-balanced, DC-coupled, low-noise input circuitry |
|
|
|
A/D converter: AK5394A |
|
|
|
Level (software selectable): |
|
|
|
|
- Professional: +4dBu nominal, 20dBu max (balanced) |
|
- Consumer: -10dBV nominal, 6dBV max (unbalanced) |
|
|
|
|
Frequency Response (20Hz-20kHz): +0.0/-.03dB |
|
|
|
Dynamic Range (1kHz, A-weighted): 120dB |
|
|
|
Signal-to-Noise Ratio (A-weighted): 120dB |
|
|
|
THD+N (1kHz at -1dBFS): -110dB (.0003%) |
|
|
|
Stereo Crosstalk (1kHz at -1dBFS): < -120dB |
|
Analogue Line Outputs (6)
|
|
|
Type: balanced, AC-coupled, 2-pole low-pass differential filter |
|
|
|
D/A converter: CS4398 |
|
|
|
Level (software selectable): |
|
|
|
|
- Professional: +4dBu nominal, 20dBu max (balanced) |
|
- Consumer: -10dBV nominal, 6dBV max (unbalanced) |
|
|
|
|
Frequency Response (20Hz - 20kHz): 0.0/-.06dB |
|
|
|
Dynamic Range (1kHz, A-weighted): 120dB |
|
|
|
Signal-to-Noise Ratio (A-weighted): 120dB |
|
|
|
THD+N (1kHz at -1dBFS): -105dB (.0006%) |
|
|
|
Stereo Crosstalk (1kHz at -1dBFS): < -115dB |
|
Combo Microphone Preamplifier/Hi-Z/Line Inputs (2)
|
|
|
Type: E-MU® XTC™ combo mic preamp and Hi-Z/line input w/ Soft Limiter |
|
|
|
Gain Range: +60dB |
|
|
|
Frequency Response (min gain, 20Hz-20kHz): +0.0/-0.1dB |
|
|
|
Stereo Crosstalk (1kHz min gain, -1dBFS): < -125dB |
|
|
|
Hi-Z Line Input: |
|
|
|
|
- Input Impedance: 1Mohm |
|
- Max Level: +18dBV (20.2dBu) |
|
- Dynamic Range (A-weighted, 1kHz, min gain): 118dB |
|
- Signal-to-Noise Ratio (A-weighted, min gain): 118dB |
|
- THD+N (1kHz at -1dBFS, min gain): -105dB (.0006%) |
|
|
|
|
Microphone Preamplifier: |
|
|
|
|
- Input Impedance: 1.5Kohms |
|
- Max Level: +6dBV (+8.2dBu) |
|
- EIN (20Hz-20kHz, 150ohm, unweighted): -129.5dBu |
|
- Signal-to-Noise Ratio (A-weighted, min gain): 119dB |
|
- THD+N (1kHz at -1dBFS, min gain): -110dB (.0003%) |
|
- Phantom Power: 48V |
|
- Soft Limiter: 5dB max compression (software selectable) |
|
|
Headphone Amplifier (2 Stereo: MicroDock M and Card)
|
|
|
Type: linear power amplifier |
|
|
|
D/A converter: CS4398 (dock), AK4396 (card) |
|
|
|
Gain Range: 85dB |
|
|
|
Maximum Output Power: 50mW (dock), 20mW (card) |
|
|
|
Output impedance: 22ohms |
|
|
|
Frequency Response (20Hz-20kHz): +0.0/-0.07dB |
|
|
|
Dynamic Range (A-weighted): 118.5dB (dock), 115dB (card) |
|
|
|
Signal-to-Noise Ratio (A-weighted): 118dB (dock), 115dB (card) |
|
|
|
THD+N (1kHz, max gain): 600ohm load: -96dB (dock), -96dB (card) |
|
|
|
Stereo Crosstalk (1kHz at -1dBFS, 600 ohm load): < -100dB |
|
Phono Input (stereo)
|
|
|
Type: RIAA equalized phono input |
|
|
|
Maximum level: |
|
|
|
|
- Professional: 60mV RMS |
|
- Consumer: 15mV RMS |
|
|
|
|
Input impedance: 47Kohm |
|
|
|
Frequency Response (20Hz - 20kHz): +0.1/-0.3dB |
|
|
|
Dynamic Range (A-weighted): 96dB |
|
|
|
Signal-to-Noise Ratio (15mV RMS unbal input, A-weighted): 96dB |
|
|
|
THD+N (1kHz, 15mV RMS input): -90dB (.003%) |
|
|
|
Stereo Crosstalk (1kHz at -1dBFS): < -80dB |
|
Digital I/O
|
|
|
S/PDIF: |
|
|
|
|
| - 2 in/2 out coaxial (transformer coupled) |
|
| - 2 in/2 out optical (software switched with ADAT) |
|
- AES/EBU or S/PDIF format (software selectable) |
|
|
|
|
ADAT: |
|
|
|
|
- 8 channels, 24-bit @ 44.1/48kHz |
|
- 4 channels, 24-bit @ 88.2/96kHz (S-MUX compatible) |
|
- 2 channels, 24-bit @ 176.4/192kHz |
|
|
MIDI - 2 in, 2 out (32 channels)
Synchronisation
|
|
|
Internal crystal sync at 44.1, 48, 88.2, 96, 176.4, 192kHz |
|
|
|
External sample rate sync via |
|
|
|
|
| - ADAT (44.1 - 192kHz) |
|
- Optical S/PDIF (44.1 - 96kHz) |
|
| - Coaxial S/PDIF (44.1 - 192kHz) |
|
|
Package Includes
|
|
|
E-MU 02 CardBus Card |
|
|
|
E-MU MicroDock M |
|
|
|
EDI (E-MU Digital Interface) cable (1 meter) |
|
|
|
Universal power adapter |
|
|
|
MIDI breakout cable |
|
|
|
CardBus Card carrying case |
|
|
|
Quick Start installation guide |
|
|
|
E-MU Digital Audio Systems CD-ROM |
|
|
|
|
- Windows 2000 and XP Drivers |
|
- E-MU PatchMix DSP |
|
- E-MU Power FX |
|
- E-MU E-DSP Effects Library |
|
- Owner's Manual and Tutorials |
|
|
|
|
E-MU Production Tools Software Bundle CD-ROM |
|
|
|
|
- Cakewalk SONAR LE |
|
- Steinberg Cubase LE |
|
- Steinberg Wavelab Lite |
|
- IK Multimedia AmpliTube LE |
|
- IK Multimedia T-RackS EQ |
|
- Minnetonka diskWelder BRONZE |
|
- SFX Machine LT |
|
- E-MU Proteus X LE (over 1000 sounds included) |
|
|
|
| .gif) |
|
 |
|
 |
 |
 |
|
