|
CD Burning
Does
Pyro burn in Track-At-Once (TAO) or Disc-At-Once (DAO) mode?
Does Pyro burn Red Book audio CDs?
Is my CD-R drive supported?
CD
Copying
Why
does Pyro say 'no audio CD in drive'?
Not enough free disk space message
Error
Messages
Runtime
11 (Divide by Zero) Error
Errors when using an Iomega CD drive such as the ZipCD
650
NEATO
Labeler
I'm
installing the NEATO CD Labeller and Setup asks for a serial number.
What is it?
I'd like to get the free NEATO CD Labeller Ket, but
NEATO Website asks for a coupon. What is the coupon code?
I installed the Media Face II label maker, but when
I select 'Make CD Labels..' from the Tools menu Pyro says that it
can't find the application.
Patch
Instructions
How
do I install the Pyro 1.01 update patch?
Does
Pyro burn in Track-At-Once (TAO) or Disc-At-Once (DAO) mode?
Pyro burns audio CDs in Disk-At-Once (DAO) mode. This means that the
drive burns the entire disc from start to finish, without turning the
laser on and off between tracks as is done in Track-At-Once mode. Disk-At-Once
discs will play in any audio CD player, including home stereos.
Back
to Cakewalk FAQs Back to Top
Does
Pyro burn Red Book audio CDs?
Yes, always. Red book is the standard for audio CDs that will play in
any audio CD player. Regardless of whether you are burning WAV files,
MP3s, or WMAs, Pyro will burn a Red Book audio CD.
Back to Cakewalk FAQs Back
to Top
Is
my CD-R drive supported?
To find
out, check the Pyro
Drive Information page. Please note that Pyro may function properly
with your CD-R drive even if it is not on the list.
Back to Cakewalk FAQs Back
to Top
Why
does Pyro say 'no audio CD in drive'?
It may take a moment for Pyro to read the CD. After inserting a CD in
the drive, wait a few seconds and then press the refresh button.
Back to Cakewalk FAQs Back
to Top
Not
enough free disk space message
Pyro uses the drive on which it is installed to store temporary files
that are necesary to perform many operations such as ripping, burning
and converting. We rocommend that you do the following:
1. Uninstall Pyro
2. Install Pyro on a drive with plenty of hard disk space.
Back to Cakewalk FAQs Back
to Top
Runtime
11 (Divide by Zero) Error
If you have a soundcard installed or intergrated with your motherboard,
make the following change:
1. Goto the Windows Control Panel, double-click the Multimdeia icon.
2. Under the Audio tab change the Preferred Playback Device to be a
soundcard that does not use proprietary volume mixer software.
Back to Cakewalk FAQs Back
to Top
Errors
when using an Iomega CD drive such as the ZipCD 650
Similar to Packet-writing software, it must be disabled for Pyro to
work optimally.
1. From the Start menu, select Run
2. Type MSCONFIG and click OK
3. Click the Startup tab
4. Uncheck 'Iomega QuikSync' and click OK
Back to Cakewalk FAQs Back
to Top
I'm
installing the NEATO CD Labeller and Setup asks for a serial number.
What is it?
Directly above the textbox where you're supposed to type in the product
key, you will see the key, which is a string of numbers and letters
(example "52ax34ab32a"). Simply type this key into the textbox
and click OK.
Back to Cakewalk FAQs Back
to Top
I'd
like to get the free NEATO CD Labeller Ket, but NEATO Website asks for
a coupon. What is the coupon code?
The coupon code is "PYRO". The coupon code must be entered
in all capital letters.
Back to Cakewalk FAQs Back
to Top
I
installed the Media Face II label maker, but when I select 'Make CD
Labels..' from the Tools menu Pyro says that it can't find the application.
If you installed the Media Face II label maker on a drive other that
C:, it is necessary to make the following change in the Windows Registry.
1. From the Start menu, select RUN.
2. Type regedit and click OK
3. Navigate to: -
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\App Paths\MediaFace.exe
4. Change the 'C' in C:\Program Files\Media Face II\MediaFaceII.exe'
to be the drive and path to where you installed the Media Face II software.
Back to Cakewalk FAQs Back
to Top
How
do I install the Pyro 1.01 update patch?
1. Download the Pyro 1.01 patch to your computer. The file name
is PY100101.exe Saving thepatch to your Windows Desktop will
make it easy to find.
2. As with all Windows Installations, we strongly recommend you close
all open programs before installing the patch installation (Step 3)
It is especially important that you close any system monitor or PC First
Aid type programs before installing any software.
3. Run the patch by either double0clicking the file or entering the
correct path in the Windows Start Menu's | Run dialogue.
4. The Ptro 1.01 patch will search your system and apply the update
to the correct location.
Click
this link to begin downloading the Pyro 1.01 patch now.
Back
to Cakewalk FAQs Back to Top
|
